Latest topics
» Gateway Timeout Errorsby von Corax Wed Dec 20, 2023 2:06 am
» We seem to be down again
by von Corax Sun Sep 24, 2023 3:42 pm
» Yet Another Upgrade: Saturday, 2 September 2023
by von Corax Sat Sep 02, 2023 9:58 pm
» Major Announcement: The Great Migration is Done!
by von Corax Sat Aug 19, 2023 9:13 pm
» If you're attempting to register at Brass Goggles…
by von Corax Fri May 26, 2023 5:30 am
» My Account on the Main Forum Has a Problem; Need Help
by Sorontar Fri Apr 28, 2023 5:57 pm
» Sceduled Server Maintenance
by von Corax Fri Feb 03, 2023 6:02 am
» Major Software Upgrade Wednesday June 8, 2022
by von Corax Thu Jun 09, 2022 6:23 pm
» Writing a Book...!
by Sarahsteam Fri Apr 01, 2022 10:26 am
» Subject: STEAMPUNK!
by Bartholomew Thatch Sat Feb 26, 2022 1:17 am
» Scheduled Maintenance Saturday Feb 19, 2022 @ 12:00 Noon EST
by Lazaras Sun Feb 20, 2022 12:49 am
» New Brass Goggles Administrator
by Xenos Thu Feb 10, 2022 7:21 am
» New member introduction thread.
by Avalon Skyboat Wed Feb 09, 2022 4:24 am
» Unexpected Change of Nationality?
by Xenos Tue Feb 08, 2022 6:34 pm
» How was your day thread (continued)
by Xenos Tue Feb 08, 2022 6:06 pm
» We Have Reached Peak Beard!
by Xenos Tue Feb 08, 2022 10:45 am
» Choose your Favorite Spare Goggles Emoticon!
by von Corax Tue Feb 08, 2022 2:02 am
» I hereby declare this a wizard-free zone
by The Corsair Mon Feb 07, 2022 3:29 am
Statistics
We have 731 registered usersThe newest registered user is vastfrontierz
Our users have posted a total of 8204 messages in 708 subjects
Cutting brass electronically- what's the process called??
+4
Narsil
Professor Higgins
Prof. George of Chaos
Steamblast Mary
8 posters
Page 1 of 1
Cutting brass electronically- what's the process called??
I'm doing up and old leather satchel and planning to reinforce the corners with some brass plates with cut-out detail, rather like filligree if I can get it fine enough.
So- what's the best way to cut out the holes in the brass sheets? Snips inevitably leave turned-up, sharp edges which I want to minimise. I'm told you can do it with a wire point connected to a source of electricity. Obviously I have no clue about or even the name of the process to search for!
Does anyone understand what the hell I'm trying to describe, and know what it's called/where I can find information on it?
Many thanks.
So- what's the best way to cut out the holes in the brass sheets? Snips inevitably leave turned-up, sharp edges which I want to minimise. I'm told you can do it with a wire point connected to a source of electricity. Obviously I have no clue about or even the name of the process to search for!
Does anyone understand what the hell I'm trying to describe, and know what it's called/where I can find information on it?
Many thanks.
Steamblast Mary- officer
- Number of posts : 120
Registration date : 2008-09-17
Re: Cutting brass electronically- what's the process called??
On seeing the thread title I forst thought you were asking after Electrolytic Machining (Jake's fine article on the subject to be found here, with background information on it here), but it appears this is not the case. It sounds as though what you are talking about might be a bit similar to arc-welding, but I know incredibly little about that particular subject, so I defer to those with more experience, and venture towards the wiki page on it to see if my guess may be accurate.
Good luck, Mary!
Good luck, Mary!
Re: Cutting brass electronically- what's the process called??
I think the process you want is called EDM (Electrical Discharge Machining).
I havent seen any info on doing this process at home though. From what I understand it uses VERY LARGE currents like those used in arc welding and is pretty much carried out by computer controlled machines.
I havent seen any info on doing this process at home though. From what I understand it uses VERY LARGE currents like those used in arc welding and is pretty much carried out by computer controlled machines.
Professor Higgins- Number of posts : 1
Location : Nottinghamshire, UK
Registration date : 2008-12-07
Re: Cutting brass electronically- what's the process called??
Yeah it sounds lie you're talking about wire EDM. It's a pretty technical process and unless you're capable of building a CNC setup you won;t really get any of the benefits of teh process. It's really most suitable for hard to machine metals and alloys there's not really much point for something like brass.
I'd suggest two options for cutting intricate shapes in brass sheet. Either use a jewelers saw and needle files or etching of some sort, which is probably best for really fine details.
You could use either chemical etching (ie acid) of electrolytic etching (probably more convenient).
I'd suggest two options for cutting intricate shapes in brass sheet. Either use a jewelers saw and needle files or etching of some sort, which is probably best for really fine details.
You could use either chemical etching (ie acid) of electrolytic etching (probably more convenient).
Narsil- Number of posts : 2
Registration date : 2008-12-07
Re: Cutting brass electronically- what's the process called??
I used electrolytic etching to make these little brass plates.
I ironed toner onto both sides of the brass, by printing a reversed and and normal copy of the pattern onto photo paper and folding the paper so the patterns matched. Every now and again I turned the plate around, since I was using a flat electrode on the other side of the jar. It's not obvious in the photo, but they did have little sharp protrusions around the edges. I spent about 20 minutes with a needle file cleaning them up.
You'd probably want to use much thicker brass sheet than I used, but I'd expect it to work much the same.
- Spoiler:
I ironed toner onto both sides of the brass, by printing a reversed and and normal copy of the pattern onto photo paper and folding the paper so the patterns matched. Every now and again I turned the plate around, since I was using a flat electrode on the other side of the jar. It's not obvious in the photo, but they did have little sharp protrusions around the edges. I spent about 20 minutes with a needle file cleaning them up.
You'd probably want to use much thicker brass sheet than I used, but I'd expect it to work much the same.
Horse Brass- crewhand
- Number of posts : 12
Age : 56
Location : Antipodean colony
Flag :
Registration date : 2008-09-15
Re: Cutting brass electronically- what's the process called??
etching would work, toner image transfare = best
Here's my old tutorial on it:
Here's my old tutorial on it:
- Spoiler:
Re: Cutting brass electronically- what's the process called??
An alternative method to doing it by etching etc would be to use a jeweller's piercing saw.
This is like a small hacksaw / fretsaw with very fine blades. You rub the blades with a bit of beeswax for lubrication, then saw away.
Leaves a good finish, although you can always use a small file to finish it off if not smooth enough.
You drill a small hole where you want to start the cut, poke the blade through the hole, attach the blade to the frame, rub on some beeswax and then saw away.
Hope this helps.
This is like a small hacksaw / fretsaw with very fine blades. You rub the blades with a bit of beeswax for lubrication, then saw away.
Leaves a good finish, although you can always use a small file to finish it off if not smooth enough.
You drill a small hole where you want to start the cut, poke the blade through the hole, attach the blade to the frame, rub on some beeswax and then saw away.
Hope this helps.
Alexander Edmund Clough- gunner
- Number of posts : 30
Flag :
Registration date : 2008-10-18
Re: Cutting brass electronically- what's the process called??
are you thinking EDM (Electrical discharge machining)?
EDM article on wiki
Cheers
Harold
EDM article on wiki
Cheers
Harold
HAC- Comanding Officer
- Number of posts : 228
Registration date : 2008-09-27
Re: Cutting brass electronically- what's the process called??
Phew! My head is spinning with all the information, I've certainly learnt a lot after reading through everything.
It appears that the process described to me was indeed electrolytic etching and once I've got the designs finalised and printed out, I'll be giving it a shot. Wish me luck...
Thank you everyone for contributing your advice & experience.
It appears that the process described to me was indeed electrolytic etching and once I've got the designs finalised and printed out, I'll be giving it a shot. Wish me luck...
Thank you everyone for contributing your advice & experience.
Steamblast Mary- officer
- Number of posts : 120
Registration date : 2008-09-17
Similar topics
» MealTime whats for dinner?
» Is Brass Goggles down again?
» Brass-Gogglers -
» Best way to polish brass
» Brass Google taken over by mediocrity...
» Is Brass Goggles down again?
» Brass-Gogglers -
» Best way to polish brass
» Brass Google taken over by mediocrity...
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum